ST-010 / SX-010

ST-010 / SX-010 Planetary Gearboxes can output up to 1100 Nm (depends on ratio)

Additional Resources:

Find what gearbox suits your motor using this tool

Calculate your machine and find the required gearbox output torque using this tool

Horizontal Tabs

Overview

Number of stages:	1 to 4 stages
Transmission ratios:	3.55:1 to 1692.0:1
Efficiency:	Up to 98%
Inputs Types:	IEC Motor Flange Servo Motor Flange Solid Input Shaft with Key Worm Gearbox Flange Hydraulic Motor Flange
Output Shaft Types:	Hollow Shaft with Shrink Disk Hollow DIN 5482 Splined Shaft Hollow Shaft with Keyway Solid Shaft with Key Solid DIN 5482 Splined Shaft
Versions:	With B5-Style Flange With B5-Style Flange and Reinforced Bearings With Feet

Specifications

Stages	Ratio	T_2N(1.2M)	T_2N(6M)	T_2Peak	n_1N	n_1max
Stages	Ratio	(Nm)	(Nm)	(Nm)	(rpm)	(rpm)
1	3.55	1100	832	2220	1500	2800
	4.28	1100	832	2220	1500	2800
	5.60	800	601	1590	1500	2800
	6.75	700	539	1402	1500	2800
	8.67	450	343	925	1500	2800
2	12.6	1100	832	2220	1500	2800
	15.2	1100	832	2220	1500	2800
	19.9	1100	832	2220	1500	2800
	24.0	1100	832	2220	1500	2800
	28.9	1100	832	2220	1500	2800
	31.4	800	601	1590	1500	2800
	37.8	800	601	1590	1500	2800
	45.6	700	539	1402	1500	2800
	58.5	700	539	1402	1500	2800
3	45.0	1100	832	2220	1500	2800
	54.2	1100	832	2220	1500	2800
	65.3	1100	832	2220	1500	2800
	70.8	1100	832	2220	1500	2800
	78.7	1100	832	2220	1500	2800
	85.3	1100	832	2220	1500	2800
	102.8	1100	832	2220	1500	2800
	111.5	1100	832	2220	1500	2800
	134.4	1100	832	2220	1500	2800
	162.0	1100	832	2220	1500	2800
	172.6	1100	832	2220	1500	2800
	208.0	1100	601	1590	1500	2800
	211.6	800	601	1590	1500	2800
	250.7	1100	832	2220	1500	2800
	255.2	800	601	1590	1500	2800
	271.7	800	601	1590	1500	2800
	307.6	700	539	1402	1500	2800
	327.6	800	601	1590	1500	2800
	394.9	700	539	1402	1500	2800
4	337.1	1100	832	2220	1500	2800
	365.7	1100	832	2220	1500	2800
	396.5	1100	832	2220	1500	2800
	440.7	1100	832	2220	1500	2800
	477.9	1100	832	2220	1500	2800
	531.1	1100	832	2220	1500	2800
	575.9	1100	832	2220	1500	2800
	624.4	1100	832	2220	1500	2800
	694.2	1100	832	2220	1500	2800
	752.6	1100	832	2220	1500	2800
	836.6	1100	832	2220	1500	2800
	907.1	1100	832	2220	1500	2800
	966.4	1100	832	2220	1500	2800
	1093.5	1100	832	2220	1500	2800
	1144.4	1100	832	2220	1500	2800
	1185.4	800	601	1590	1500	2800
	1317.8	1100	832	2220	1500	2800
	1404.0	1100	832	2220	1500	2800
	1522.0	800	601	1590	1500	2800
	1692.0	1100	832	2220	1500	2800

Stages	Ratio	T_2N(1.2M)	T_2N(6M)	T_2Peak	n_1N	n_1max
Stages	Ratio	(Nm)	(Nm)	(Nm)	(rpm)	(rpm)
2	10.4	1100	832	2220	1500	2800
	12.6	1100	832	2220	1500	2800
	16.4	800	601	1590	1500	2800
	19.8	700	539	1402	1500	2800
3	37.0	1100	832	2220	1500	2800
	44.6	1100	832	2220	1500	2800
	53.8	1100	832	2220	1500	2800
	58.4	1100	832	2220	1500	2800
	70.3	1100	832	2220	1500	2800
	84.8	1100	832	2220	1500	2800
	91.9	800	601	1590	1500	2800
	110.8	800	601	1590	1500	2800
	133.5	700	539	1402	1500	2800
	171.4	700	539	1402	1500	2800
4	131.7	1100	832	2220	1500	2800
	158.7	1100	832	2220	1500	2800
	191.3	1100	832	2220	1500	2800
	207.4	1100	832	2220	1500	2800
	230.5	1100	832	2220	1500	2800
	250.0	1100	832	2220	1500	2800
	301.3	1100	832	2220	1500	2800
	326.7	1100	832	2220	1500	2800
	363.1	1100	832	2220	1500	2800
	393.8	1100	832	2220	1500	2800
	474.7	1100	832	2220	1500	2800
	505.6	1100	832	2220	1500	2800
	514.6	800	601	1590	1500	2800
	609.4	1100	832	2220	1500	2800
	734.5	1100	832	2220	1500	2800
	796.3	800	601	1590	1500	2800
	959.9	800	601	1590	1500	2800
	1157.0	700	539	1402	1500	2800
	1232.4	800	601	1590	1500	2800
	1485.5	700	539	1402	1500	2800

T_2N values are calculated at n₁=n_1n, continuous duty cycle, uniform operation and KA=1 according to ISO 6336. T_2N(1.2M) has been calculated for 1200000 revolutions of the output shaft, and T_2N(6M) has been calculated for 6000000 revolutions of the output shaft. The application factor KA according to DIN-3990-1 must be considered for each duty cycle and machine type.
T_2Peak is the maximum output torque the gearbox can tolerate during startups, inversions or other peaks. This value should never be used for continuous operation or for intermittent operation with frequent accelerations.
n_1N is the rated input speed for continuous operation
n_1Max is the maximum input speed for intermittent service. For continuous operation at speeds over n_1n please inquire

Dimensions